What to Measure Before Planning a Custom Pantry

Before you tidy up for photos, open the cupboard that bugs you most. If you find three bags of penne you didn’t know you had, take a picture. That’s where I’d start with custom pantry planning. You’ve got room for the pasta. What you need is a way to see it.

Grab a tape measure and your phone. A rough sketch is plenty for a first conversation, even if you draw it on the back of the grocery list.

Measure the space, including the doorway

Sketch the pantry from above and label each wall. Measure the width, the depth from the back wall to the front of the space, and the height from floor to ceiling. Measure the width again a little higher up. If the two numbers differ, write down both and mark where you took them.

Measure the clear opening you can actually pass through with the door open. On your sketch, mark which way the door swings. Snap a photo from the kitchen so we can see the fridge, island or wall beside it. Include the things that stick out, like a deep door casing or a bulkhead, and mark any outlets and vents.

Planning pantry shelves around the awkward stuff

For me, this is where the tape measure earns its keep. A stand mixer might fit on a shelf with half an inch to spare. Can you get your hands around it to lift it out? If you’ll use it on a pantry counter, measure it with the head tilted up, too. The bowl has to come out somehow.

Pick two or three things you’d like to store and measure them the way they’ll sit, handles and lids included. Think about how often you reach for each one. The platter you use at Christmas can live up high. If you bake every Sunday, let’s find the mixer a spot where it’s easy to lift.

Leave room to open the pantry pull-outs

Open the fridge and stand where you usually set down groceries. Now imagine pulling a pantry drawer all the way out beside you. Measure from the front of the proposed cabinet to the nearest obstacle. In a tight kitchen, painter’s tape on the floor helps you see where the drawer would end and whether you’d have room to stand there.

If there’s a wall tight against one side of the cabinet, send us a photo of that corner. We’ll want to check that the door can swing far enough for those drawers to clear it.

Will you make coffee in there?

In the NKBA’s 2027 kitchen trends survey, 73% of designers expect dedicated small-appliance stations to be popular. If you’d love one for coffee, walk through making a cup. Where will you fill the water tank? Can you open the lid with a shelf overhead? Where will you set your mug?

If an appliance will run in the pantry, jot down the model number. That lets us check the manufacturer’s clearance and ventilation requirements as we plan the shelves and counter.

Your custom pantry planning checklist

For a first conversation, send a sketch with your rough measurements, a couple of photos and one detail you really want us to know. “I have to move the blender every time I want the mixer” is exactly the kind of thing we can design around. We’ll confirm the site measurements as the design develops.

Planning a pantry in Calgary? Tell us what’s in that cupboard.

Start Your Project